CARPENTER WANTED to build Simple 2x4 and Plywood Shelving Oakland - $100 (oakland lake merritt / grand)

The first picture is what I'm interested in building with 2 shelf levels.
I'm looking for a Skilled Carpenter who can transport 2x4's (approximately 8-10 pieces) and Plywood (4 sheets) from Home Depot Emeryville to Downtown Oakland area to a Storage Unit at drive in level, measure, make accurate cuts if necessary and fasten screws into Simpson Connectors and 2x4's and Plywood to make simple shelving using Simpson Connector RTC2Z on all 2 rear corners of the Plywood area and AC4 for the lower forward legs on the 2 sides.
I can assist you with most of the work to make it faster and easier.
I have my own screw gun.
I'm interested in a quality finished product.
I would estimate it will take approximately 6-8 hours of your time.
You must be willing to work with me as some items in storage would have to be partially moved around to insert the shelving.
You will need a battery powered saw to cut plywood and 2x4's and a Screw Gun with extra batteries as I don't have power.
Plan on 3/4 to a full day working.
Build 2 Units.
Use 2x4 x 8 foot posts with 4 x 8 foot plywood around the 5 and 7 foot high level.
Both units should have 2 brace pieces towards the bottom and 1 at the back at the lower level and 2 pieces of plywood at the upper shelf area.
The 8 foot Studs would be left to run upwards or trimmed off.
The plywood would have to be notched at the 4 corners (1 1/2 x 3 1/2 inches) on the lower piece.